|
| You are here:Offer Board |
| Offer Board |
|
 |
|
|
[Buy] |
HDPE-LDPE Dual-Purpose Film Blowing Machine Set 2007-3-10 8:09:23
Main characteristic：Use:
It is used for blowing the various plastic film of low density polyethylene(LDPE),high density polythylene(HDPE)and linear low density polyet-hylene(LLDPE)etc,Which are widely used for packing food,fruit,garments,textile,barbage bag and vestbag other civil and industrial products,etc and for vestbag.
Characteristics:
The cylinders and the screw stems of model SJ-45-50 extruder are made of high-quality alloy steel with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment.FM-600 auxiliary machine can be freely adjusted within the limits of 700mm according to the technologjcal requirements of different materials,and is fitted with a plug-in plate mechanism for making vest bag ,The double-rolling and double-cutting coiling unit adopts torque motor to keep proper tension and make even and roll-changing easy.[Detailed information] |
|
[Buy] |
PHOTOELECTRIC CONTROL DOTTNG-OFF ROLL FILM BAG-MAKING MACHINE 2007-3-10 8:09:21
Main characteristic：1.Automatic bag-making counting and automatic alarm.
2.Wuth accurate photoelectric eye tracking,the machine can automatic ally stop when bag making error exceeds 4pieces.
3.The bag making length is controlled by the button switch.[Detailed information] |
|
[Buy] |
Auto-soft Loop Handle Making Attachment 2007-3-10 8:09:19
Main characteristic：There is a shelf for affiliated material behind this machine. The width of the affiliated material is identical to the loop length ,The affiliated material is cut into narrow trips, and fed into the top fold ,The flexible handle film feeding system is feeding by motor ,The roll of film is fed,cut and welded automatically and is precisely positioned to the center of the carier bag.[Detailed information] |
|
[Buy] |
Microcomputer Control Automatic Heat-sealing and Heat-cutting Bag Making Machine 2007-3-10 8:09:18
Main characteristic：DFR Series Bag Making Machine is a kind of bag-making equipment mainly used for making flat bag and vest bag, etc, of PP,PE and other plastic materials .The bag-cutting mode of Model DFR-600 microcomputer Control Automatic Heat-sealing and Heat-cutting Bag Making Machine is of high-temperatrue bag -cutting type. It increases a high-temperature melting and cutting line(also named protection line )beside the original heat-sealed line , thus making the bags even firmer .It adops one chip microcomputer as master control and adopts the stepping notor to fix the length. The length, thus making the while machine run smoothly with high bag making accuracy, so it is a kind of ideal equipment for making flat bags and vestbags,etc...[Detailed information] |
|
[Buy] |
Microcomputer Control High-speed Continuous-rolled Vest Bag 2007-3-10 8:09:16
Main characteristic：Model HD-500/800 Microcomputer Control High-speed Contin uous-rolled Vest Bag Making Machine has such functions as photo electric automatic tracking microcomputer length setting, high limit stopping,automatic counting, automatic alarm on reaching the set value, high compensation accuracy with such characteristics as neat bags,littleerror and high automatic of whole machine,so it is a kind of ideal equipment for producing blank bags, colour bags,flat bags and vest bags.etc.and other various plastic soft packing bags.[Detailed information] |
|
[Buy] |
Microcomputer Ribbon-through Type Garbage Bag Making Machine 2007-3-10 8:09:14
Main characteristic：This equipment has been improved,designed and manufactured by our company ribbon-through referring to foreign technology and is specially used for making ribbon-through type garbage bags or Bopp,pp,flat bags,etc,of LDPE,HDPE plastic film and other materials. It adopts computer control, electric eye tracking, automatic temperature control, automatic counting and automatic alarm and meanwhile has such functions as edgefolding, mouth cutting,punching and ribbon passing through, etc. Wigh such characteristics as once-through operation, film and standard sealing and sealed edge and beautiful appearance, etc. The equipment also can produce continuous-rolled bags with special requiements and has such functions as multi-folding and spot brcaking, so it is a kind of ideal supporting equipment for bag making machine.[Detailed information] |
|
[Buy] |
Model Convex Composite Color Press 2007-3-10 8:09:12
Main characteristic：Printing color unit can be increased or decreased according to the customers‘requirement with compo-site style.The printing can be finished one time continuously with both sides.
With 360 degree of installment system,ease of operation,and stability,The prarts of transmission is adopted with gearstructure with full sealing lubrication,The tension system is adopted with magnetc powder clutchcontroller,the parts of rewinding is adolpted with torue moltor.With double over passage design,fast drying,fast printing winding and rewinding are both doubel working mechanisms to make the material complete with non-stop.[Detailed information] |
|
[Buy] |
One-off Plastic Glove Molding Machine 2007-3-10 8:09:10
Main characteristic：This machine is produced one-off plastic glove which is suitable for medical ?eating and drinking treatment ,the marketing potential is immense.Exact orientation?speediness for making bag?convenient operation;Logical design?compact structure?predominant performance;Control the speed by the transducer, automatic account.[Detailed information] |
|
[Buy] |
Rotary Machine Head Film Blowing Machine Set 2007-3-10 8:09:08
Main characteristic：Use：
It is used for blowing the plastic laminated film of low density polyethylene(LDPE),high density polythylene(HDPE)and linear low density polyethylene(LLDPE)etc,Which are widely used for packing liquid,industrial products,garments and textile,Ect,And printing lamination.
Characteristics：
The cylinders and the screw stems of the extruder are made of high quality alloy steel with optimum hardness and strong corrosion resistance after nitrogen treatment and precision finishing.The auxiliary machine has a plat from working table for making operation easy and is equipped with bubble stabilizing ring.
Double-rolling and double-cutting coiling unit adopts torque motor to motor to keep proper tension and make even and roll-changing easy[Detailed information] |
|
[Buy] |
wind suction heat cuting tablet machine 2007-3-10 8:09:06
Main characteristic：It can recycle waste plastic film and is applied for recycling and heat cutting and . granulation of PE、PVC.
1 mainframe taper single-screw extruder screw diameter 65/110mm screw fineness ratio 16∶1
machine barrel heating power 8KW mainframe pulling power 11KW screw rotate speed 50-80rpm
output 30-45kg/nr center height of 90cm machine 90cm
2.deflection arch deflection arch specification ?91/?107mm deflection arch heating power 3.3KW dross filter replacing distance 360mm
3. pelleting sector type of electric machine YCT112-4A power 0.75KW pelletizing knife rotate speed 230-760rpm
4. Pneumatic aggregate cooler centrifugal fanner type 5-32 power 4KW blast volume 504～2880m3/min
5. external dimension: 4640×1850×3000mm[Detailed information] |
|
[Buy] |
Hem Rewinding Machine 2007-3-10 8:09:04
Main characteristic：Use：
It is mainly used for membrane to fold and form.
Characteristics:
This machine is adopted with current two-phase motor and stepless regulator
.And also it can be inserted with other materials.Such as insert the perlite membrane in the middle of the white membrane.[Detailed information] |
|
[Buy] |
Micro-computer control hot sealer 2007-3-10 8:09:03
Main characteristic：This machine has the functions of photoelectric tracking, auto . rewinding microcomputer length defining ,automatic counting , pneumatic punching ,end alarm frequency governor etc. It′s an advanced bag machine at present regarded as the replacement of the like imported ,suitable for the package of knit goods , clothing , food and stationery by heating sealing and cutting of plastic materials such as PE,OPP BOPP and so on .[Detailed information] |
|
[Buy] |
Electric Control Dry-Wet Grain Making Machine 2007-3-10 8:09:00
Main characteristic：It is used for recover-ingpolyethylene and polypro-pylene waste film and waste thread forre -granulation.The maching body is equipped with protecting cover to makeoperation even safer and constant temperature even more stable.[Detailed information] |
|
[Buy] |
Material Cutting and Punching Machine 2007-1-18 13:39:42
Main characteristic：Model 525
Distance between Worktable and Clamp 150-215mm
Working Pressure 4t
Total Power 1.1Kw
Travel of Clamp 28mm
Weight of Machine 480kg
Overall Dimensions 900×600×1230mm[Detailed information] |
|
[Buy] |
HIGH-SPEED (THREE-SERVO) THREE-SIDE SEALING ZIPPER STANDING BAG-MAKING MACHINE 2007-1-18 13:39:39
Main characteristic：function:
The whole machine adopts industrial control level computer and auxiliary three-servo control system. All the parameters adopt CRT real-time display. The bag-making speed, bag-making length, temperature, counting, punching and conveyor quantity of doubling finished products, etc. can be preset. Releasing tension can be controlled by full-automatic adjustable magnetic powder constant tension control system. Automatic alarm for releasing tension,central tension, colour code losing and out of temperature limit, etc. LPC automatic deviation-rectifying, double photoelectric tracking. New type pressure-lifting 6 times conveying function Computer 16-route PID constant temperature control.Pneumatic multi-functional punching, automatic collecting of cut rim charge, electrostatic elimination. Technology of double self-standing bag, double concave-convex buckle device is in the lead at home, which can truly make bags by one machine with multiple functions.
Additional functions: Easy and simple to handle; high products smoothness with well-pressed and beautiful shape, high heat sealing strength at sealing side; and high bag making speed.
Products:
bags for food, washing powder and sweets, etc.[Detailed information] |
|
[Buy] |
Soft Handle Bag-making Machine 2007-1-18 13:39:37
Main characteristic：The whole machine adopts micro-comuter control nd material-puling by stepping motor.(Servomotor can be selected and equipped).
Arbitrary fixed-length ,accurate and stable step photoelectric tracking ,stopping automatically when the label is lost.
Automatic pressure synchronous punching and synchronous sealingAutomatic and synchronous two -side tape gluing ,automatic punching.
Heat-sealing decorative border ,automatic a constant temperature ,firm and smooth sealing .[Detailed information] |
|
[Buy] |
Computer Sealing Tree-edge Sealing Bag Machine 2007-1-18 13:39:35
Main characteristic：USE&FEATURE:
The machine is suitable for compounding plastic double edge sealing, form of medium sealing, cut-off and sealing into a bag. Adopting the electric machine with double frequency tape brade, the main electric machine can make a stepless speed regulation and high order stop, and accurate cut-off and length-fixing. The automatic deviations of photoelectricity track and the electric heat temperature, it is a kind of ideal bag making machines in food packing trade.[Detailed information] |
|
[Buy] |
Hydraulic pressure Rock-arm Decide Machine 2007-1-18 13:39:08
Main characteristic：USE:
Suitable for cutting shoe and shoe upper materials.
Main technical parameter
Model BX-15T
Power 1.5Kw
Table Size 710×410
Weight 750Kg
Pressure 15t
Overall d
imensions 710×800×1300
Max.Wash of Cutting Dint 150kn
Swing Beam With 350
Stroking Regulate Range 5-75
Wash of Cutting Speend 0.10m/S
Up Down Operation Ben Distanc for Usage 65-150mm
Down Table Size 1000×500
Electric of Power 1.5kw[Detailed information] |
| First Up Down Last 1/1Page Total18Products 20Products/page |
|
| |
|
|
